Drones, FPV, Multicopters, Aerial photography,helicopters European best shop

+32-486-808080 Contact Us

ERC Latest



01-04-2017: New Whoop frames arrived, upgrade your inductix, also WBX frames from Ragg-e in stock now!


29-07-2016: Check out the new MSH Protos 380, it just came in! We have its spare-parts defined HERE.


20-07-2016: Want to race crash proof with your Graupner Racing Gate? You can now, because our graupner tape is back in stock!


16-07-2016: Want to cruise through the city in style? Check out our new added electric scooters!


15-07-2016: Are you ready for the FPV racing season? Purchase our custom designed Flag, Archer Gate and Ring Gate and make an awesome circuit!


13-07-2016: Problems with fitting a camera on your FPV racer? Too big? Check out the new Runcam Swift now!


  • New Arrivals

  • On sale

More...
  • Gens Ace 6750mAh 14.8V 70C 4S1P HardCase Lipo Battery

    Gens Ace 6750mAh 14.8V 70C 4S1P HardCase Lipo Battery

    Gens Ace 6750mah 14.8V 70C 4S1P Hardcase Lipo Battery

    Specifications:

    • Net Weight (g)     616
    • Brand     Gens ace
    • Capacity     6750 mAh
    • Discharge Rate (C)     70
    • Max Cont Current (A)     472.5
    • Max Burst Current (A)     945
    • Max Burst discharge Rate (C)     140
    • Parallel (P)     1
    • Voltage     4S (14.8V)
    • Length (mm)     139
    • Width (mm)     47
    • Thickness(mm)     50
    • Wire Gauge     No
    SKU: B-70C-6750-4S1P-HARDCASE-14
    €96.99
    inc. VAT

     72HR STOCK
  • Align DS825M High Voltage Brushless Servo

    Align DS825M High Voltage Brushless Servo

    Align DS825M High Voltage Brushless Servo

    Designed specifically for helicopters, utilizes brushless motor for fast speed, high torque and super efficiency reaction, allowing helicopter to perform with faster and higher precision.
    Rudder servo with 0.02sec/60° ultra high speed response, pushing the extreme.
    Utilizes brushless motor design for fast speed, high efficiency. And with the absence of brush wear, the longevity of servo is greatly increased.
    Supports 8.4v high voltage to provide optimal speed and torque performance of the brushless servo.
    Designed specifically for helicopters, with highest specifications on the market: 0.02sec/60°ultra fast speed and 12.5kg-cm monstrous torque, allowing helicopter to perform with faster and higher precision.
    Ultra high signal resolution for excellent precision and smoothness.
    Hardened high strength superalloy gears that increase the lifetime.
    Brand new high voltage brushless servo equipped new CNC machined aluminum case, not only exhibited top of the line servo aesthetics, but also combine heat sink function and best protection for the servo.
    Supports both analog and digital control signals.
    Suitable for T-Rex 550/600/700/800 rudder use.

    Specifications:

    • Stall torque: 10.0kg.cm(7.4V)
    • Stall torque: 12.5kg.cm(8.4V)
    • Motion speed: 0.03sec/60°(7.4V)
    • Motion speed: 0.02sec/60°(8.4V)
    • Rating voltage: DC 7.4-8.4V
    • Temperature range: -20°C~+60°C
    • Dimension: 40 x 20 x 39 mm
    • Weight: 72g

    Accessories:

    • DS825M High Voltage Brushless Servo x 1
    • DS615/655 Servo Arm Set x 1
    • Socket Botton Head Screw x 4(M2.5x10mm)

     

    SKU: HSD82501T
    €142.99
    inc. VAT

     72HR STOCK
  • T-REX 700XN Dominator KIT only NEW 2018 model

    T-REX 700XN Dominator KIT only NEW 2018 model

    T-REX 700XN Dominator KIT only NEW 2018 model

    Features:

    • New slim chassis design
    • Revised clutch lining with steel alloy
    • New powerful cooling system
    • Reinforced carbon rear support

    Technical specifications:

    • Length: 1346mm
    • Height: 384mm
    • Width: 202mm
    • Main rotor blade length: 700mm
    • Main rotor diameter: 1570mm
    • Tail rotor blade length: 106mm
    • Tail rotor diameter: 281mm
    • Motor pinion: 13Z
    • Main gear: 107Z
    • Autorotation gear: 104Z
    • Tail rotor gearbox: 22Z
    • Translation: 8.23: 1: 4.73
    • Tank capacity: 630cc
    • Take-off weight (with battery): 4540g

    Content:

    • 1x Align T-REX 700XN Dominator kit ONLY( all below not included)
    • 1 pair of 700mm carbon main rotor blades
    • 1 pair of 106mm carbon tail rotor blades
    • 3x Align DS820M swashplate servo
    • 1x Align DS825M tail servo
    • 1x Align DS530 throttle servo
    • 1x Align B6TX 2-in-1 voltage regulator / pre-glow unit
    • 1x BEASTX Governor Sensor
    SKU: RH70N11KIT
    €769.00
    inc. VAT

     72HR STOCK
  • Nitro engines Piston locker/Stopper

    Nitro engines Piston locker/Stopper

    Use this handy convenient piston stopper to lock any glow engines piston in place for safe and easy flywheel or clutch removal.

    Make your work go faster with simply remove the glow plug from the engine, screw the Piston Stopper in place, and your piston and crankshaft will be locked into position.

    Made from high quality aluminum this piston stopper features a knurled grip for quick finger tightening.

    Plastic cap will prevent Scratching the piston.

    SKU: RCMT035
    €5.00
    inc. VAT

     IN STOCK
  • Goblin Black Nitro SAB Canopy Grommet

    Goblin Black Nitro SAB Canopy Grommet

    Goblin Black Nitro SAB Canopy Grommet

    Includes:

    • Canopy Grommet x 2pcs

    Use for:

    • Goblin Black Nitro
    SKU: HA055-S
    €4.00
    inc. VAT

     72HR STOCK
  • Goblin Black Nitro RX Battery Strap 185mm L 16mm W

    Goblin Black Nitro RX Battery Strap 185mm L 16mm W

    Goblin Black Nitro RX Battery Strap 185mm L 16mm W

    Includes:

    • SAB RX Battery Strap x 2pcs

    Use for:

    • Goblin Black Thunder 650/700/Nitro
    SKU: HA008-S1
    €6.00
    inc. VAT

     72HR STOCK
  •  Goblin Black Nitro 650/700 Tail Push Rod Guide

    Goblin Black Nitro 650/700 Tail Push Rod Guide

    Goblin Black Nitro 650/700 Tail Push Rod Guide

    Includes:

    • BOM Tail P
    • Socket Screw M2.5 x 6 x 2pcs
    • Brass Tube 40mm x 1pc

    Use for:

    • Goblin Black Thunder 650/700
    SKU: H0770-S
    €13.90
    inc. VAT

     IN STOCK
  • Goblin Black Nitro/Thunder 700 Carbon Fiber Tail Boom Green/Carbon

    Goblin Black Nitro/Thunder 700 Carbon Fiber Tail Boom Green/Carbon

    Goblin Black Nitro/Thunder 700 Carbon Fiber Tail Boom Green/Carbon

    Includes:

    • Carbon Fiber Tail Boom Green/Carbon x 1pc
    • Carbon Fiber Tail Locking Reinforcement x 2pcs
    • Doulble Side Tape x 2pcs
    • Cup Point Set Screws M3X20 x 1pc
    • Washer 3,1 x 12 x 1.8 x 2pcs
    • Metric hex locknut Nuts M3 H4 x 4pcs
    • Aluminum Tail Boom Support x 2pcs
    • Socket Head Cap M3x12 x 2pcs
    • Nylon Screw M8 x 20 x 2pcs
    • Flat Head Socket Cap M3x8 x 1pc

    Compatible with:

    • Goblin Black Thunder
    • Goblin Black Nitro

    Canopy NOT included!

    SKU: H0764-S
    €79.90
    inc. VAT

     72HR STOCK
  • Goblin Black Nitro Canomod Airbrush Canopy Green Carbon

    Goblin Black Nitro Canomod Airbrush Canopy Green Carbon

    Goblin Black Nitro Canomod Airbrush Canopy Green Carbon

    Includes:

    • Canomod Airbrush Canopy Green Carbon x 1pc
    • Canopy Grommet x 2pcs
    • Canopy Edge Protection x 1pc
    • Canopy Anti Vibration x 1pc

    Compatible with:

    • Goblin Black Nitro 700
    SKU: H0762-S
    €119.90
    inc. VAT

     72HR STOCK
  • Goblin Black FBL support Low

    Goblin Black FBL support Low

    Goblin Black FBL support Low

    Includes:

    • Aluminum Throttle Servo Spacer x 2pcs

    Use for:

    • Goblin Black Nitro/SPORT

     

    SKU: H0728-S
    €6.90
    inc. VAT

     72HR STOCK
  • Throttle Servo Linkage - Goblin Black Nitro

    Throttle Servo Linkage - Goblin Black Nitro

    Throttle Servo Linkage - Goblin Black Nitro

    Content:

    • Steel throttle servo linkage x 1pc
    • Plastic ball Linkage x 2pcs

     

    SKU: HC243-S
    €4.80
    inc. VAT

     72HR STOCK
  • SAB Goblin Radial bearing 12 x 18 x 4mm (4pcs)

    SAB Goblin Radial bearing 12 x 18 x 4mm (4pcs)

    SAB Goblin Radial bearing 12 x 18 x 4mm (4pcs)

    Includes:

    • Bearing  Ø12 X Ø18 X 4 x 4pcs

    Use for:

    • Goblin Black Nitro

     

     

    SKU: HC425-S
    €8.00
    inc. VAT

     72HR STOCK
More...
  • Agile 5.5 Helicopter Kit free Microbeast

    Agile 5.5 Helicopter Kit free Microbeast

    The Agile has been designed to offer something different, not just an improvement, but a step ahead of what is commonly done. The Agile was created to adapt to every type of flight: low to high speed, gentle maneuvers, Hard to 3D unimaginable level!
    Intelligent solutions have been used to provide high-end performance with very sensitive controls, giving a feeling of incredible strength while maintaining softness in movement.
    To ensure that nothing is left to chance and bring you the best overall design, hundreds of test flights were carried out by experienced drivers.
    Agile is agility AND quality, you can’t go wrong!
     
    Required to fly:

    • Main Blades: 550mm
    • Tail Blades: 85mm-95mm
    • Motor: 1100-1200Kv
    • ESC: 90A-120A / 6s
    • 3x Cyclic servos
    • 1x Rudder servos
    • Flybarless System- Microbeast included
    • 1x Lipo 5000 6S 45C
    • Transmitter and receiver

     Specifications:

    • Length: 1120mm
    • Height: 350mm
    • Width: 176mm
    • Main Rotor Diameter: 1250mm
    • Main Blade Length: 550mm
    • Tail Rotor Diameter: 260mm
    • Tail Blade Length:92mm
    • Motor Pinion Gear: 21T
    • Motor KV: 1100KV
    • Main Drive Gears:(First Reduction) 21/54 (Second Reduction) 17/56
    • Tail Drive Gears:(Front)58/15 (Tail Shaft)16/16
    SKU: AGILE55BEAST
    €519.00
    inc. VAT

    
    SALE
  • Agile 5.5 Kit Super combo, Motor, YGE 120LV, Savox servos, Blades

    Agile 5.5 Kit Super combo, Motor, YGE 120LV, Savox servos, Blades

    Agile 5.5 Kit Super combo, Motor, YGE 120 LV, Savox servos, Blades

    Included items of this special combo

    • Agile 5.5 Helicopter Kit
    • Motor KDS 4020-1100
    • ESC YGE 120 LV
    • 4 servos Savox ( optional upgrade to RJX servos )
    • Carbon main and tail Blades
    • Flybaress  controler ( optional )

      Specifications of the Heli:
       
    • Length: 1120mm
    • Height: 350mm
    • Width: 176mm
    • Main Rotor Diameter: 1250mm
    • Main Blade Length: 550mm
    • Tail Rotor Diameter: 260mm
    • Tail Blade Length:92mm
    • Motor Pinion Gear: 21T
    • Motor KV: 1100KV
    • Main Drive Gears:(First Reduction) 21/54 (Second Reduction) 17/56
    • Tail Drive Gears:(Front)58/15 (Tail Shaft)16/16
    SKU: AGILE5.5COMBO
    €959.00 €1350.00
    inc. VAT

    
    SALE
  • Beam AvantGarde E6 V2 Flybarless helicopter Kit 600 size, Full CNC/metal

    Beam AvantGarde E6 V2 Flybarless helicopter Kit 600 size, Full CNC/metal

    This is the Beam AvantGarde 600 Class Electric Flybarless Helicopter Kit. This easily serviced helicopter features an innovative design that provides reduced weight and a low parts count. Other features include a quiet direct drive tail system, a fully serviceable CNC machined swash plate, heavy duty carbon fiber frames and much more, wrapped up inside a durable aerodynamic fiberglass canopy.

    Beam is 100% produced in Korea. no cheap parts, no bad bearings- all high quality!!

    One of the only kits allow choice of 6 and 12S lipos, where you beginner or competition pilot- this machine is for you.

    Features:

    • Innovative design allows for reduced wieght, easy servicing and low parts count
    • Durable canopy with aerodynamic design
    • Fully serviceable CNC swash plate
    • Triple bearing block design
    • Robust carbon fiber frames
    • Ultra quiet direct drive tail system
    • Turnbuckle pitch link design
    • Herringbone cut main gear & pinion gear design

    Specifications:

    • CNC full metal precision rotor head w/8mm spindle.
    • 11 tooth 6mm shaft size pinion, mod 0.8 (straight cut).
    • 100 tooth main gear, mod 0.8 (straight cut).
    • 4.0: 1 Tail Gear Ratio
    • Designed for power system up to 6S or 12S Li-Po
    • Carbon fiber frames for ultra-rigid and compact design
    • Easily serviceable engine maintenance
    • Triple bearing supported 10mm hardened main shaft
    • 120 degree dual race ball bearing metal swashplate
    • High quality DuPont® plastic injection mold w/strengthening fibers
    • Stainless steel damper mounted bearing torque tube for high efficiency
    • Top to bottom supported tail pitch plate for improved accuracy
    • Dual race ball bearing with thrust bearing supported tail blade grips
    • Front mounted rudder servo with push/pull bell crank
    • Carbon tail boom supports
    • Sleek Pre-painted fiberglass canopy
    • New lightweight landing gear
    SKU: BEAMAV600
    €399.00 €599.00
    inc. VAT

     LOW STOCK
    SALE
  • BL Sport Heat Sinks 28mm

    BL Sport Heat Sinks 28mm

    Anodized Black 28mm heat sink will keep your brushed or brushless motor cool and efficient. The heat sink includes built in internal machined fins for maximum cooling and was specifically made for Helis so aircraft aluminum was used to keep weight to a minimum.
    SKU: SKU14483
    €3.00 €9.50
    inc. VAT

     IN STOCK
    SALE
  • CF Ferrar Blades

    CF Ferrar Blades

    Walt Ferrar Carbon Fiber Tail Blades are made for FP and CP Micro helicopters to improve tail controls and tail performance.Weight: 0.41 gramsUsage: Micro HelisFeatures: Length: 43mm or 48mmRoot Thickness: 2mm Mounting Hole: 2.00mm
    SKU: SKU6412
    €9.90 €18.00
    inc. VAT

    
    SALE
  • Fpv Complete set, Monitor, TX, Antennas, Camera

    Fpv Complete set, Monitor, TX, Antennas, Camera

     This is the set you will need to fly FPV,

    Set Included:

    • Diversity receiver monitor 7 or 10" ( choice) with built in Battery, Sunshade, Charger
    • Video-Audio 5.8 GHZ, 25mw receiver CEE approved
    • Set of Spyro Antennas, for TX, RX and Coil Antenna for Diversity receiver
    • 600-700TVL Sony CCD FPV camera

     

    SKU: FPVSET1
    €393.00
    inc. VAT

    
    SALE
  • HTS SS Blue Sensors Telemetry Pack

    HTS SS Blue Sensors Telemetry Pack

    Set of sensors For Use with Optima 7 & 9 Receivers And Hitec HTS Telemetry system

    Included:

    • GPS sensor HTS-GPS Sensor x 1
    • Temperature sensor x 2 packs (HTS-TEMP)
    • Current sensor (HTS-C50) and HTS-C200) x 1
    • Magnetic RPM sensor (HTS-MRPM) x 1
    • Optical RPM sensor (HTS-ORPM) x 1
    SKU: 110846S
    €59.00 €139.00
    inc. VAT

    SALE
  • HTS-NAVI 2.4G WIRELESS TELEMETRY

    HTS-NAVI 2.4G WIRELESS TELEMETRY

    Description: HTS-NAVI HITEC 2.4 GHz Wirelss Telemetry Navigator Wireless download and display for essential telemetry information on your PC Compatiable with any radio fitted with Hitec AFHSS system Displayable telemetry information Receiver or Power Battery Voltage RPM Fuel Level Current Temperature Voltage GPS (Altitude, Distance, Latitude, Longitude, Speed, Direction and Trajectory) To monitor telemetry information, HTS-SS Sensor station and other concerned sensors are required. Download software for HPP-22 (Hitec PC programmer) to utilize HTS-NAVI.

    SKU: MTPX114007
    €29.00 €75.00
    inc. VAT

     LOW STOCK
    SALE
  • JR Servo Extension 22AWG brown/red/orange flat wire 30cm- Special price

    JR Servo Extension 22AWG brown/red/orange flat wire 30cm- Special price

    Special price JR Servo Extension 22AWG brown/red/orange flat wire 30cm

    SKU: AM-2002
    €2.50
    inc. VAT

     IN STOCK
    SALE
  • Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute Rescue

    Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute Rescue

    Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute. This amazing combo will make your flying experience unique, all in safety and for a very affordable price! This special offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    Sky-Hero professional Spyder 6 Hexacopter combo (AVH00-601Combo) including:

    1. Sky hero Spyder 6 frame set x 1( no canopy)
    2. Motor Avizar 3536-380KV
    3. ESC 40 amps
    4. Propeller 14"
    5. Distribution Board 100Amp
    6. Hardware to mount the motors
    7. Opale Paramodels Parachute
    SKU: XMAS21
    €1299.00
    inc. VAT

    SALE
  • Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights

    Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights

    Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights. This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Semi professional Spyder 6 Hexacopter with Pancake (SKH00-601-PC)
    • 6x Kylin CNC aluminium Motor mount set
    • 2x Water Resistant LED Lights (ALULED-016)
    SKU: XMAS16
    €799.00
    inc. VAT

    SALE
  • Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers

    Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers

    Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers and a 10% discount coupon for your next purchase. This amazing combo will make your flying experience unique and for a very affordable price! This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700 Kit (SKH00-401)
    • ABS Painted Canopy
    • 2x Red Color LED Lights (ALULED-016R)
    • 2x White Color LED Lights (ALULED-016)
    • 2x High Fluorescent Stickers (SKU46635)
    • 10% saving coupon for your next order (coupon's details will be sent with the order)
    SKU: XMAS9
    €479.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set

    Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set

    Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set. This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit (SKH00-401)
    • FREE Sky-Hero Pancake conversion set Spyder (SKH01-011)
    SKU: XMAS17
    €479.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit + Opale Paramodels Parachute rescue kit

    Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit + Opale Paramodels Parachute rescue kit

    Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame + Opale Paramodels Parachute rescue Kit. This amazing combo will make your flying experience unique and for a very affordable price! This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame (SKH00-401)
    • Rescue Parachute for Sky-Hero Multicopters (OP17512)
    SKU: XMAS23
    €649.00
    inc. VAT

     72HR STOCK
    SALE
  • VBar NEO 6.1 Express- Only with Heli kit

    VBar NEO 6.1 Express- Only with Heli kit

    Save money on VBar NEO 6.1 Express, purchased only together with kit

    this item doesnt qualify for any double discounts

    SKU: MIK-49451
    €175.00
    inc. VAT

     72HR STOCK
    SALE
  • Weatronic Radio transmitter BAT60 without receiver, Carry case- special offer

    Weatronic Radio transmitter BAT60 without receiver, Carry case- special offer

    With the new transmitter BAT 60 weatronic sets a new standard. New design and colors and all the technical features will make your heart beat faster. Amazing high quality, 9 ball bearing per stick, the non-wearing hall sensors, the new battery management and - last but not least - the brand new innovative stick design with the clever concept of interchangeable feedback parts convinced even the last critics.

    From now on there is no limit for channels or predetermined structures. Up to 96 (!) free configurable functions could directly control up to 64 servos, 32 virtual switches, 16 flight phases, 96 limiters and 96 mixers together with other highlights make all your dreams come true. Other solutions as for example screenshots and a complete model management with copy, edit and export of models are the results of our long lasting practical experience. As a development from the leader in reliable data-communication our bidirectional redundant transmission system, the flight-controller separated from the Linux processor as well as the intelligent battery management speak for themselves. Yet another highlight of this transmitter is the new stick design meeting all the possible requirements of model makers including the novel gas/braking lever solution.

    High-tech standard made in Germany in the Aeronautic Centre:

    • Proprietary gimbal design with 9 ball bearings
    • wear-free thanks to the hall-sensors
    • innovative gas- / brake handle concept
    • 22 free programmable control elements
    • 5ʺ capacitive touch screen 800 x 480 colour LCD
    • „Look and find“ function due to built in GPS receiver
    • web interface for external access and programming
    • separate charge controller for each Li-Ion cell
    • one battery is always reserved at 25% reserve capacityfor the safer landing
    • micro-SD card for data recording
    • USB-A and USB-B (master and slave)
    • 3,5 mm headphones socket
    • two parallel transmitting and receiving systems
    • optional 3-axial gyro
    • optional 3-axial positioning with acceleration sensors
    • optional WLAN and Bluetooth, UMTS via USB
    • optional with control functions in stick and selectable stick length

    Programming and adjusting:

    The new BAT 60 - now the pilot can adjust his model, with all GigaControl options, directly with the transmitter. Simple - easy to understand - and intuitive for all users, from the beginner to the advanced.

    Technical data:

    •   transmission: adaptive frequency hopping operation with “listen before talk” function
    •   hopping-frequencies: 80
    •   hopping-speed: 100 Hz
    •   antennas: 2 x patch antennas (angle of radiation > 180°)
    •   4 Li-Ion batteries à 3000 mAh
    •   integrated GPS receiver
    •   operating- and charging voltage: 10,0 - 20,0 Volt
    •   temperature range: -10° C to  +60° C, non-condensing
    •   dimensions: 220 x 200 x 51 mm

    Included:

    • Transmitter BAT 60
    • No receiver included
    • Carry case
    SKU: BAT60HAND
    €1199.00 €1699.00
    inc. VAT

    SALE
  • Wooden Blades 550 mm

    Wooden Blades 550 mm

    Low cost, and yet excellent product for Beginner and for Aerobatic practicing.
    Durable blades, made for 3-4 layers of quality wood, will deliver excellent performance without making holes in the pocket.

    Fits all 30-50 (550)size helis, length 550mm

    SKU: RCWB-550
    €10.00 €26.00
    inc. VAT

    SALE

Manufacturers

Latest Video

RC Market