New Arrivals

  • Kontronik PYRO 750-56L2 Competition Brushless motor 55mm shaft

    Kontronik PYRO 750-56L2 Competition Brushless motor 55mm shaft

    Even when the PYRO 750-56L2 COMPETITION is fishing for complements by his look
    the internal welth is the important.
    Due to its perfect winding, hand made by Holger Lambertus from SlowflyWorld the inner resistance is incredible low and the result of power even higher.

    The PYRO in short:

    • Neodym magnets, heat resistant up to 150 degree C
    • Specialized wire, heat resistant up to 300 degree C
    • Perfectly balanced
    • Optimized metal sheets
    • Optimized ventilation

    Specification:

    • 560 RPM/V
    • 25000 RPM Max
    • 5kW continuous Power
    • 6 mm shaft Diameter
    • 0.5 g
    • 8 mΩ
    SKU: K277103C
    €549.00
    inc. VAT

    NEW
  • Scorpion Tribunus 06-120A (SBEC) speed controller for Helicopters, Air

    Scorpion Tribunus 06-120A (SBEC) speed controller for Helicopters, Air

    Scorpion Tribunus 6S-120A speed controller for Airplanes and helicopters (SBEC)

    Can be used with Airplane and Heli mode
    Stored and unstored Governor, external governor
    Data Logging, Data output port for external data logging device, such as Mikado V control / Vbar Combinations. ( more compatible device will be added gradually)
    ESC setup can be set by Mikado V control Radio PC connectivity, Android connectivity ( OTG cable needed), V link IICable(optional) plus Diode adaptor(included) cable needed.

    Specification:

    • Weight (Without Connectors)     108g (3.8 oz)
    • Max Continuous Current     120 Amps
    • Peak Current     150Amps
    • Operating Voltage Range     8-26 Volts
    • BEC Output voltage:     5.1V to 8.3V adjustable.
    • Max Continuous BEC Output     10 Amps @ 8.3 V
    • Peak BEC Output     20 Amps/1s @ 8.3 V
    • On Resistance     0.4 mOhms *2
    • Size     23.7 x 37 x 73.8 mm
    SKU: TRIBUNUS-06-120
    €169.00
    inc. VAT

     LOW STOCK
    NEW
  • Align T-Rex 600XN Rudder Servo Mount Set For Nitro

    Align T-Rex 600XN Rudder Servo Mount Set For Nitro

    Use for T-REX 600XN.
    Carbon fiber material / Aluminium alloy material.

    SKU: H6NB010
    €22.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Clutch/Start Shaft New Version

    Align T-Rex 600XN Clutch/Start Shaft New Version

    Use for T-REX 600XN.
    Chromoly steel alloy material.

    SKU: H6NB015
    €17.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Carbon Fiber Main Frame(U)

    Align T-Rex 600XN Carbon Fiber Main Frame(U)

    ●600XN Carbon Fiber Main Frame(Upper side) x 1
    ●M2.5 Cone Nut x 8
    ●700X Frame Washer x 1
    SKU: H6NB001
    €34.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Drive Gear Assembly

    Align T-Rex 600XN Drive Gear Assembly

    Use for T-REX 600XN.
    Glass fiber reinforced nylon material.

    SKU: H6NB013
    €15.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Shapely Reinforcement Plate And Brace Assembly

    Align T-Rex 600XN Shapely Reinforcement Plate And Brace Assembly

    ●600XN Shapely Reinforcement Brace(L) x 1
    ●600XN Shapely Reinforcement Brace(R) x 1
    SKU: H6NB003
    €27.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN CCPM Metal Swashplate

    Align T-Rex 600XN CCPM Metal Swashplate

    ●CCPM Metal Swashplate x 1
    ●Bearing(6706ZZ) x 2(Φ30xΦ37x4mm)
    ●Linkage ball B(M3x4) x 6(Φ5x12mm)
    ●Φ5 Long linkage ball(M3x4) × 1(Φ5x28mm)
    SKU: H6NH005
    €40.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Engine Spur Gear Set/20T

    Align T-Rex 600XN Engine Spur Gear Set/20T

    Use for T-REX 600XN.
    High carbon steel material.
    Gear Ratio 1:8.5.

    SKU: H6NG003
    €17.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Idler Pulley Spur Gear

    Align T-Rex 600XN Idler Pulley Spur Gear

    Use for T-REX 600XN.
    High carbon steel material.

     

    SKU: H6NG002
    €24.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Main Shaft

    Align T-Rex 600XN Main Shaft

    ●600XN Main shaft x 2(Φ6xΦ10x188.3mm)
    ●Socket collar screw x 2(M3x19mm)
    ●M3 nut x 2
    ●Main shaft spacer(0.3) × 1(Φ10.1xΦ14x0.3mm)
    ●Main shaft spacer(0.5) × 1(Φ10.1xΦ14x0.5mm)
    SKU: H6NH004
    €19.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Main Rotor Holder Arm

    Align T-Rex 600XN Main Rotor Holder Arm

    ●Main rotor holder arm x 2
    ●Φ5 Linkage ball B(M3x4) x 2
    ●Socket collar screw x 4(M3x6mm)
    SKU: H6NH003
    €26.99
    inc. VAT

     72HR STOCK
    NEW
  • Mikado VBar Control Touch Radio 5.8" Multi-Touch Screen, Wifi (White Transparent)

    Mikado VBar Control Touch Radio 5.8" Multi-Touch Screen, Wifi (White Transparent)

    Check this video, its explains all

    Software Highlights:

    • Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
    • Readily understandable graphic user interface.
    • Easy programming for new models via the familiar VBar setup wizard.
    • ESC setup wizard for programming all types of speed controllers.
    • ESCs with VBar Control support can be programmed directly from the radio.
    • Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
    • Bank switching with three banks (fourth Bank Autorotation optional).
    • Real time logging and real time graphic vibration analysis available on display.
    • Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
    • Create your own screendesign directly on the touchscreen display.
    • Full manual available on the radio by means of context sensitive help.
    • Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
    • Automatic power-on, if an already bound model is switched on.
    • Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
    • Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
    • Wireless buddy boxing with two VBar Control radios, fully configurable.
    • Interact with your smart phone via WiFi (control your music player, exchange photos, open web sites or videos, expand your display for telemetry purposes ...)—Apps for Android™ and iOS™ are under development, will be relaeased later on.
    • Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
    • Access our App Store and do over-the-air online-updates via WiFi*.
    • Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

    Hardware Highlights:

    • Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
    • Very good readability even in bright sunlight.
    • WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
    • Very fast start-up time, from off to fully operational in three seconds.
    • High perfomance low power controller for best user experience and long runtimes.
    • Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
    • Unlimited model memory.
    • Virtually unlimited number of control channels.
    • High range, low latency, antenna diversity both on transmitter and receiver.
    • Intelligent antenna monitoring and management.
    • Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
    • Precision gimbals with four ball bearings, fully adjustable.
    • Collective stick can be equipped with optional throw limiter.
    • Delicate rubber lining for comfortable, slip-free and safe holding.
    • Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
    • Large 2 Watt loudspeaker for alarms and voice output.
    • Vibration alarm (adjustable).
    • Memory accessible as a USB memory stick, no drivers needed.
    • Built-in Lithium Polymer battery allows for long run times.
    • Charge through USB connector or built-in charger.
    • Power supply for fast charging included.

    * Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

    SKU: MIK-5135
    €1099.00
    inc. VAT

     LOW STOCK
    NEW
  •  Governor Sensor MICROBEAST Plus

    Governor Sensor MICROBEAST Plus

    • Suitable for T-REX 600N / T-REX 700N
    • Must use with:
    - BEASTX MICROBEAST Plus Flybarless System

    Content
    • 1x Beastx Governor Sensor (255mm/6pin connector)
    • 2x RPM Magnet (4x1.6mm)

    SKU: HEGBP001
    €9.95
    inc. VAT

     LOW STOCK
    NEW
  • EPS 2750 mAh 6S 30C XT60 plug

    EPS 2750 mAh 6S 30C XT60 plug

    The Lipo-Batteries from EPS E Propulsion Systems are made by the company EURL Breizh Modélisme, a company located in France. Their products are 100% French and 0% Asian, therefore these products are the best quality. The products they sell are selected on their quality and are sold throughout whole Europe. Their products are quality for a very good price. The amazingly powerful EPS 6S 2750mAh 30C Lipo Battery is made from the best materials.

    E Propulsion systems, your best source for Lithium Polymer (LiPo)

    Specifications:

    • Product Type: Battery Pack lithium polymer (LiPo)
    • Capacity: 2750mAh
    • Voltage: 22,2V
    • Maximum Continuous Discharge: 30C (82.5A)
    • Maximum peak discharge (3s): 60C (165A)
    • Weight: 416g
    • Dimensions (ep x width x length): 32.7mm x 45 mm x 135 mm
    • Power Connector: XT 60
    • Balancing Connector: JST-XHS
    • Number of C load: 1 - 3C Recommended
    SKU: EPS2750-6S30XT60
    €65.00
    inc. VAT

     LOW STOCK
    NEW
  • Optipower Ultra 50C Lipo Battery 3500mah, 6S, 10AWG

    Optipower Ultra 50C Lipo Battery 3500mah, 6S, 10AWG

    Optipower Ultra 50C Lipo Battery 3500mah, 6S, 10AWG

    Capacity..................................3500mAh
    Cells.......................................6
    C Rate Continuous..................50
    Recommended Charge C Rate...1c
    Max Charge C Rate.................3c
    Plug/ Silicon Leads..................12AWG
    Balancer.................................JST-XH
    Length....................................140mm
    Width......................................44.5mm
    Thickness................................53.5mm
    Weight....................................623g

    SKU: OPR35006-50C
    €119.00
    inc. VAT

     72HR STOCK
    NEW
  • Lynx Servo DS-895-HV Aluminum CNC Case - 1PC Set

    Lynx Servo DS-895-HV Aluminum CNC Case - 1PC Set

    Lynx Heli Innovations introduce the first Metal Case Servo for 180 CFX.

    Using the Lynx LX9004 - Lynx Servo DS-895-HV, we build a special Cover and Rear Case in order to increase global Servo performance.

    After many pilot report and crash we decided to improve the standard Lynx DS-895-HV Servo with precision CNC Servo Cover and Rear Case.

    With this Metal Case, servo become more precise and robust in case of crash, gear mesh become very precise and cannot move as can upend on plastic case for wear or crash shock.

    The other important feature is the incredible heat-sink effect of CNC Rear Cover. Thanks a special design the motor case is in direct connection with Rear Cover keeping the motor temperature under dangerous values, increasing the global performance and the spam-life.

    Details and design combined with strength, durability, accurate CNC tolerances, finish, and most important lightweight and features, this Servo Case will increase Servo performance and assure flight precision.

    Lynx upgrade design: the new frontier of lightweight and high precision upgrade parts for micro helicopters.

    DS-895-HV SERVO FEATURES:

    • Direct replacement for the standard 180 CFX cyclic servo.
    • Servo Case Material: CNC Aluminum Cover and Rear Case with Techno Polymer Core.
    • Full Metal Gear Digital Precision Servo (Brass and Aluminum Alloy)
    • Input (V-in): 4.5 to 6 V
    • Frequency: 333 Hz
    • Neutral Point: 1500μs
    • Speed:     0.06 sec / 60° at 4.5V
    •      0.05 sec / 60° at 6 V
    • Stall Torque: 1.40 kgcm at 4.5V
    •             1.80 kgcm at 6 V
    • Dimension: 20.05 x 8.35 x 19.70 mm
    • Connector JST-1.50 (180CFX standard)
    • Weight including 150 mm cable connector: 6.50g
    • Output Gear support: Radial bearing 4x7 W2
    • Servo Arms: 4 type included + LX1097 - Micro Servo Gear Saver Arm preinstalled at zero-degree pitch.

    PACKING LIST:
    1 x DS-895-HV Aluminum Case Servos

     

    SKU: LX2512
    €36.00
    inc. VAT

     LOW STOCK
    NEW
  • ZEAL ENERGY 3-Blade Carbon Fiber Main Blades 550mm (Neon Orange)

    ZEAL ENERGY 3-Blade Carbon Fiber Main Blades 550mm (Neon Orange)

    With a passion for cutting edge performance, Zeal rotor blades define the intensity you feel with RC helicopter flight, unlocking the drive to push harder, faster & lower.

    Constructed of the highest quality carbon fiber layup, Zeal rotor blades are optimized for modern day RC helicopter performance, designed & ready to be pushed like no other blade on the market today.

    Balanced with an optimal center of gravity, and coalescing symmetrical airfoil technology chosen for maximum levels of rotor performance, Zeal rotor blades were brought forth to suit the demands of those in search of the extremes.

    With Zeal rotor blades, quality & composition can be seen, felt & heard - a quality that is synonymous with the passion behind the performance. Composed of true carbon fiber construction, these light weight rotor blades were designed for maximum agility & performance, providing rapid control inputs with crisp response capability.

    Outfitted to perform, and constructed with the rigors of modern day flybarless technology, Zeal rotor blades allow any pilot to choose a blade that will add that extra element of intensity, providing a flight that will not soon be forgotten.

    Features:

    •     High Quality Carbon Fiber Construction
    •     Light Weight with High Strength
    •     Optimized Airfoil Design for Maximum Performance
    •     Multiple Size Ranges Available
    •     Factory Balanced with Optimized Center of Gravity
    •     High Agility Design


    Includes:

    •     (1) Set of Main Rotor Blades (3 blades)
    •     (6) pcs x 1mm washers


    Specifications:

    •     Material: Carbon Fiber
    •     Length: 550mm
    •     Chord width: 50mm
    •     Root thickness: 10mm
    •     Hole Diameter (Bolt): 4mm
    •     Weight: approx 116g (single blade)

     

    SKU: ZHM-NRG550C-3X
    €97.00
    inc. VAT

     IN STOCK
    NEW
  • ZEAL Energy Carbon Fiber Main Blades 550mm (Neon Orange)

    ZEAL Energy Carbon Fiber Main Blades 550mm (Neon Orange)

    With a passion for cutting edge performance, Zeal rotor blades define the intensity you feel with RC helicopter flight, unlocking the drive to push harder, faster & lower.

    Constructed of the highest quality carbon fiber layup, Zeal rotor blades are optimized for modern day RC helicopter performance, designed & ready to be pushed like no other blade on the market today.

    Balanced with an optimal center of gravity, and coalescing symmetrical airfoil technology chosen for maximum levels of rotor performance, Zeal rotor blades were brought forth to suit the demands of those in search of the extremes.

    With Zeal rotor blades, quality & composition can be seen, felt & heard - a quality that is synonymous with the passion behind the performance. Composed of true carbon fiber construction, these light weight rotor blades were designed for maximum agility & performance, providing rapid control inputs with crisp response capability.

    Outfitted to perform, and constructed with the rigors of modern day flybarless technology, Zeal rotor blades allow any pilot to choose a blade that will add that extra element of intensity, providing a flight that will not soon be forgotten.

    Features:

    •     High Quality Carbon Fiber Construction
    •     Light Weight with High Strength
    •     Optimized Airfoil Design for Maximum Performance
    •     Multiple Size Ranges Available
    •     Factory Balanced with Optimized Center of Gravity
    •     High Agility Design

    Includes:

    •     (1) Set of Main Rotor Blades
    •     (4) pcs x 1mm washers

    Specifications:

    •     Material: Carbon Fiber
    •     Length: 550mm
    •     Chord width: 50mm
    •     Root thickness: 10mm
    •     Hole Diameter (Bolt): 4mm
    •     Weight: approx 116g (single blade)
    SKU: ZHM-NRG550C
    €64.90
    inc. VAT

     IN STOCK
    NEW
  • OXY2 41mm Tail Blade Yellow

    OXY2 41mm Tail Blade Yellow

    Description:

    OXY2 41mm Tail Blade Yellow

    Packing List:

    • 1 Set x OXY2 - 41mm Tail Blade, Yellow

     

    SKU: SP-OXY2-103
    €4.50
    inc. VAT

     IN STOCK
    NEW
  • OXY2 38mm Tail Blade Yellow

    OXY2 38mm Tail Blade Yellow

    Description:

    OXY2 38mm Tail Blade Yellow

    Packing List:

    • 1 Set x OXY2 - 38mm Tail Blade, Yellow

     

    SKU: SP-OXY2-102
    €4.50
    inc. VAT

     IN STOCK
    NEW
  •  Align DS530 Digital Servo

    Align DS530 Digital Servo

    High rigidity, shock resistant metal gears.

    Coreless Motor Design for fast speed, high efficiency, and low power consumption.

    Higher signal resolution for smooth movements.

    Fast speed with high torque of 9.0kg/cm. High strength composite alloy gears with durable structure characteristics.

    Aluminum alloy mid case construction for instantaneous heat dissipation, maintaining servo’s high efficiency.

    Supports high voltage 8.4V.

    Powerful and precise servo suitable for T-Rex 500 CCPM cyclic use.

    Specification :

    • Stall torque: 6.5kg.cm(6.0V)
    • 9.0kg.cm(8.4V)
    • Motion speed: 0.085sec/60°(6.0V)
    • 0.065sec/60°(8.4V)
    • Rating voltage: DC 6.0-8.4V
    • Temperature range: -20°C ~ +60°C
    • Dimension: 35.1 x 15.1 x 29mm
    • Weight: 29g

    Accessories :

    • DS530 Digital Servo x 1
    • Servo Arm x 1
    • DS515/525 Servo Arm Set x 1
    • Socket Button Head Self Tapping Screw x 4(T2.6x12mm)
    SKU: HSD53002T
    €42.00
    inc. VAT

     LOW STOCK
    NEW
  • Align T-Rex 600XN Clutch Bell Set

    Align T-Rex 600XN Clutch Bell Set

    Use for:

    • T-REX 600XN

    Aluminium alloy material

    Content:

    • 1x 600XN (44.4x47x20mm)
    • 1x Bearing 695ZZ (5x13x4mm)

     

    SKU: H6NB016XXT
    €24.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Engine Fan Cover Set

    Align T-Rex 600XN Engine Fan Cover Set

    Use for:

    • T-REX 600N / 600XN

    Glass fiber reinforced nylon material / Aluminium alloy material

    Content:

    • 1x Engine fan cover (L) (134.58x97x36.34mm)
    • 1x Engine fan cover (R) 134.58x97x43.08mm)
    • 2x Hex mounting bolt (3x5x49mm).

     

    SKU: H6NB014XXT
    €16.99
    inc. VAT

     72HR STOCK
    NEW

Manufacturers